Rockwell Automation
Legrand
Finder
SES
ETA
Entrelec
Rafi
Chint
Stego
Rose
Vogt
Stulz
Jokari
GMW
Wohner
Profilati
Lovato
Cabur

ROSE

Custom Build-A-Box    
rose Rose+Bopla Custom Build-A-Box® is a series of extrusions that can be cut to any length from stock extrusions, and assembled with dustight or watertight lids as required. This offers a quick rugged housing for today’s engineers. Originally designed to house standard VME Bus Cards/Euro Cards in our off-the-shelf pre-packaged models, the extrusions and lids in the Custom Build-A-Box® program offer engineers much greater design
possibilities.
Custom Build-A-Box® lets you decide on the size of your enclosure based on your application. First choose the profile you wish to use, then consider all the options to complete your project; length of box, type of lid, type of finish, secondary services, accessories, or the placement of PC Boards. The Build-A-Box® system allows for printed circuit boards to be inserted along the integrated guide rails. These profiles can be configured in basically two different types of designs: dustight enclosures with IP 40 protection, using sheet metal lids without a gasket; and watertight enclosures with IP 65 protection, using die-cast aluminum lids with a gasket.
Rose+Bopla stocks bare aluminum extrusion in 1-meter lengths and sells it by the meter. These profiles are available in 8 sizes. Finishing, painting, machining and other secondary services are sold by the box. Dustight lids, watertight lids, and accessories are sold separately. Assembly hardware and gaskets are supplied as required.
Dustight lids are stamped from aluminum plate. Watertight lids are die-cast aluminum and come with a neoprene gasket that is oil and gasoline resistant. EMI/RFI shielded gaskets are available for all watertight Build-A-Box® versions by special request. Minimum order may apply.
 
Multitronic Build-A-Box    
rose The Multitronic Build-A-Box® line consists of a series of aluminum profiles that can be cut to any length required and capped with aluminum plate lids to make electronic enclosures. Eight profile designs are available in the series. Some profiles are hollow and some are split-half extrusions. All profiles are slotted internally for PCB or chassis mountings. Three of the Multitronic profiles incorporate an exterior heat sink design.
Profiles are stocked and sold unpainted in meter lengths. Plate lids are also stocked unpainted. M3 x 8mm self tapping lids screws which must be ordered separately are available. Seven profile sets (marked with an * below) have external “T” slots for bracket wall-mounting. One profile set (10955170/10011113) can be wall-mounted with an optional “L-shaped” plate lid.
Rose+Bopla can paint Multitronic Build-A-Box® enclosures in any color specified.
 
Multitronic TS Build-A-Box    
rose The Multitronic TS Build-A-Box® line consists of a series of aluminum profiles that can be cut to any length required and capped with aluminum plate lids to make electronic enclosures.
Eight different designs can be made from these 5 extrusions. All profiles are split-half extrusions and most feature exterior slots designed to accept an optional 35mm DIN rail mounting bracket. All profiles are slotted internally for PCB or chassis mounting. Optional “L-shaped” aluminum plate lids are offered for wall-mount applications.
Extrusions are stocked and sold unpainted in meter lengths. Aluminum plate lids are also stocked in unpainted form. M3 x 8mm self-tapping lid screws, which must be ordered separately are available..
Rose+Bopla can paint MultitronicTS Build-A-Box® enclosures in any color specified.
 
ANG Panel Meter Housings    
rose Rose+Bopla’s ANG Panel Meter housing offers NEMA 4X protection. This ¼ DIN housing body is constructed from a hollow extrusion of heavy duty aluminum for maximum integrity, with internal slotting to accommodate printed circuit boards or chassis. Gasketed, cast aluminum front and rear lids provide maximum protection. External mounting bars provide secure panel mounting in 2 or 4 positions.
The front bezel and rear lid can be taken off without removing the housing from the panel. ANG Panel Meter Housings fit into pre-existing panels. Standard depths of 109.5mm and 165.5mm are available off-the-shelf in black. Custom lengths and colors are available.
The ANG Panel Meter Housing comes complete with, enclosure body, mounting profiles, bezel, front frame, rear lid,1.5 allen key, adhesive plate, screws and washers.
Product Catalogue
Alubos    
rose The new ALUBOS enclosure line offers custom sizing options for robust hand-held applications. The basis for the ALUBOS system is a series of aluminum extrusions, sold in meter lengths.
The standard ALUBOS profiles are available in 9 sizes: 57mm x 32mm; 82mm x 32mm; 82mm x 22mm; 106mm x 32mm; 106mm x 42mm; 108mm x 42mm; 138mm x 34mm; 169mm x 52mm; 169mm x 82mm; and 210mm x 74mm (external dimensions). Extrusions are designed with guide grooves inside for printed circuit boards. All of the standard extrusions are offered with a satin black, fine texture, powder-coat finish or as bare aluminum, (special order) which can be painted or powder-coated.
The latest addition to the line is the 2-part ALUBOS enclosure. The 2-part version offers more convenient mounting options, with integrated slot-in grooves that easily enable the insertion of printed circuit boards into an open enclosure. The sealing between the two profiles, as well as between the ends of the profiles ensures an ingress protection IP 65. The 2-part enclosure consists of a base and top shell and is offered in 7 sizes: 57mm x 32mm; 82mm x 32mm; 82mm x 22mm; 106mm x 42mm; 138 x 34mm; and 169mm x 82mm. These profiles are only available in black powder-coat finish.
All ALUBOS versions have a wide range of accessories available, from die-cast endcaps and wall-mount brackets to integrated battery compartments and adapters for combining profiles. Black seals are standard, however, colored seals are offered to give your ALUBOS a more individual touch.
Product Catalogue
BOS-Ecoline    
rose The BOS-Ecoline enclosure system combines the custom sizing advantages of aluminum profiles with the cost effectiveness of ABS plastic end lids to create a robust enclosure that can be used for a wide range of electronic applications. These clear anodized aluminum profiles are available in three different versions – closed, open on one side, or split profiles – in four profile width sizes from 57.5 mm to 120 mm. Profiles are equipped with integral guide grooves for PC Boards. Two ABS plastic end lids are available, with or without wall brackets. Profiles feature recessed areas for front membranes or membrane keypads. IP 40 rating is standard, but can be increased to IP 54 on ELP profiles with seals in the end caps. Seal kits and end lids are sold separately. Profiles are sold in meter lengths. Product Catalogue
NoVoTronic    
rose The new Rose NovoTronic enclosure system offers 5 aluminum profile sizes for robust measurement and control technologies (range-106mm x 49 mm to 233mm x 121 mm). Inside each profile are integrated guide grooves for PC boards. Each profile size is available in 3 standard lengths, as well as meter lengths for custom sizing. Profiles and lids are powder-coated jet black, similar to RAL 9005. Multi-function side profiles are powder-coated ruby red, similar to RAL 3003. Accessories include: wall-mount bracket profiles, transparent covers for lids, and foot/connection elements.
The NoVoTronic features 2 multi-function side profiles that can be used for attaching wall-mount brackets, straps, or other mechanical devices without machining the enclosure itself. Diecast aluminum lids with gaskets complete the enclosure and provide protection up to IP 65.• Aluminum profile enclosure system in 5 diameters for data acquisition, PC,
and measurement and control technology.
• External screw channels guarantee complete use of internal area.
• Integrated guide grooves for PC Boards.
• External groove system
• Variable profile lengths
Product Catalogue
Alu-Topline    
rose With Alu-Topline Rose+Bopla is presenting a new desktop enclosure whose innovative enclosure technology and ergonomic lines create new opportunities for use in the field of data recording and processing.
Two ABS lids function as a profile end. The split profile of the desktop enclosure guarantees easier and faster assembly of the electronics and other components.
The enclosure is supplied as standard in two profile heights and five lengths. The aluminum profile is available in silver anodized aluminum, the end covers are supplied in quartz gray, similar to RAL 7039 and in graphite gray, similar to RAL 7024.
As a system supplier, in addition to mechanical processing Rose+Bopla also offers customer-specific membrane keypads and the assembly of complete enclosures including electronic components.
Product Catalogue